Samsung Xpress SL-M2020W Setup Wireless Print

Setup Samsung Xpress SL-M2020W printer

Samsung Xpress SL-M2020W wireless printer is one of the best laser printer devices present in the market today.

This printer device is great for official purposes as well as home using. This is an affordable device that is easly to using and offers high productivity.

The print speed of this device up to 20 ppm and allow you to streamline your workflow.

If you recently purchased Samsung Xpress SL-M2020W wireless laser printer and you don’t know how to set up this device, then worry not as here you will learn how to set up this printer device.

Below mentioned are the simple steps that you need to perform in order to set up your Samsung Xpress SL-M2020W printer.

The process to set up the Samsung Xpress SL-M2020W printer is quite simpling.

Below are the easy steps that you need to perform in order to set up Samsung Xpress SL-M2020 wireless laser printer.

Step by step to setup Samsung Xpress SL-M2020W Wireless Printer

Step I

Prior to moving ahead with the setup process using a USB wire, you must ensure that your Samsung printer device is turned on. Plus, you are required to check that the LED light of your printer device is flash.

Step II

Then, you are required to connecting the USB wire to the USB port of your system. Now, take the other end of the USB wire and connecting it to the USB port of your Samsung printer device.\

Step III

Once the connection process is over, you are required to access the wireless setup by opening the wireless settings app.

Step IV

After that, select the – Next option on the wireless setup page. This will begin the setup process of your printer.

Step V

Now, go to the wireless setup page of Samsung Easy and select the – Next option. Select the option of “Using a USB cable” for the initial setup of the printer where it is not connected to the network. Now, select “Next”.

Step VI

Now, you are required to connect your Samsung printer model to your Mac temporarily. Now, select “Next“.

source: printerstechnicalsupport.com

Step VII

Now, the installation wizard will start looking for the attached devices and then gives you wireless info.

Step VIII

In case the wizard is not able to locate your printer. then a “Printer not found” message will appear on your screen. To fix this problem, you must carefully check the USB cable running between your Samsung printer device and Mac system.

Carry out the additional step to completes the setup process

Step I

Now, you are required to select the Next option given below the printer not found dialog box. Please try using a new USB wire for the connection.

Step II

If you see the “printer not found” message again, then the dialog box will appear one more time.

Step II

Then, you are required to select your networking from the list of networks appearing before you on the screen. Now, select Next.

Step IV

if you are facing any issues related to the selection of the network, then you need to open your printer’s advanced settings option. This enables you to enter the network’s information manually.

Step V

Once you are done entering the network information, then you need to enter the network password in the password section.

Step VI

Now, allow you printer to connect to the network.

Step VII

Then, you are going to receive the Wi-Fi direct information. If you wish to turn on Wi-Fi direct on your printer device, then you must ensure that the checkbox is checked. Once you are done checking the box, then select Next.

Step II

After that, the on-screen prompts will inform you that a secure connection has been established. Now, select Finish.

source article
www.printerstechnicalsupport.com

Leave a Reply